About the ICS Code:
The ICS (International Classification for Standards) is a scheme much like the Dewey Decimal System.
Use it to find standards that are grouped by subject matter.
Back to ICS Index.
25.220.40: Metallic coatings
Level 2: 25.220 (Surface treatment and coating)
The following documents are a part of this series:
ASTM:
- ASTM-A1055 - Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
- ASTM-A1059 - Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
- ASTM-A123 - Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
- ASTM-A239 - Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
- ASTM-A385 - Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
- ASTM-A428 - Weight (Mass) Of Coating On Aluminum-Coated Iron Or Steel Articles, Standard Test Method F
- ASTM-A630 - Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
- ASTM-A780 - Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
- ASTM-A90 - Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
- ASTM-A924 - Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
- ASTM-B137 - Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
- ASTM-B200 - Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
- ASTM-B201 - Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
- ASTM-B322 - Standard Guide for Cleaning Metals Prior to Electroplating
- ASTM-B380 - Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
- ASTM-B431 - Practice for Processing of Mandrels for Electroforming (Withdrawn 1993)
- ASTM-B450 - Practice for Engineering Design of Electroformed Articles (Withdrawn 1993)
- ASTM-B456 - Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus
Chromium and Nickel Plus Chromium - ASTM-B488 - Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
- ASTM-B489 - Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
- ASTM-B530 - Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
- ASTM-B532 - Standard Specification for Appearance of Electroplated Plastic Surfaces
- ASTM-B533 - Standard Test Method for Peel Strength of Metal Electroplated Plastics
- ASTM-B537 - Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
- ASTM-B545 - Standard Specification for Electrodeposited Coatings of Tin
- ASTM-B555 - Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
- ASTM-B556 - Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
- ASTM-B571 - Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
- ASTM-B578 - Standard Test Method for Microhardness of Electroplated Coatings
- ASTM-B579 - Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
- ASTM-B602 - Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
- ASTM-B604 - Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
- ASTM-B605 - Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
- ASTM-B607 - Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
- ASTM-B633 - Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
- ASTM-B634 - Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use
- ASTM-B635 - Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited
- ASTM-B636 - Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
- ASTM-B650 - Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
- ASTM-B651 - Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
- ASTM-B679 - Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
- ASTM-B680 - Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
- ASTM-B689 - Standard Specification for Electroplated Engineering Nickel Coatings
- ASTM-B695 - Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
- ASTM-B696 - Standard Specification for Coatings of Cadmium Mechanically Deposited
- ASTM-B697 - Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
- ASTM-B699 - Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
- ASTM-B700 - Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
- ASTM-B733 - Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
- ASTM-B734 - Standard Specification for Electrodeposited Copper for Engineering Uses
- ASTM-B735 - Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
- ASTM-B762 - Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
- ASTM-B764 - Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
- ASTM-B765 - Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
- ASTM-B766 - Standard Specification for Electrodeposited Coatings of Cadmium
- ASTM-B767 - Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
- ASTM-B798 - Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
- ASTM-B799 - Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
- ASTM-B809 - Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor ("Flowers-of-Sulfur")
- ASTM-B816 - Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited
- ASTM-B832 - Standard Guide for Electroforming with Nickel and Copper
- ASTM-B840 - Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits
- ASTM-B841 - Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits
- ASTM-B842 - Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits
- ASTM-B843 - Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
- ASTM-B851 - Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
- ASTM-B866 - Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
- ASTM-B867 - Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
- ASTM-B874 - Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
- ASTM-B875 - Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
- ASTM-B877 - Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
- ASTM-B904 - Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding
- ASTM-B905 - Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
- ASTM-B920 - Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
- ASTM-B946 - Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products
- ASTM-C633 - Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
- ASTM-D4370 - Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath
- ASTM-D4399 - Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
- ASTM-D4584 - Standard Test Method for Measuring Apparent pH of Electrocoat Baths
- ASTM-D6492 - Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel
- ASTM-E1659 - Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
- ASTM-E2354 - Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units
- ASTM-F1044 - Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
- ASTM-F1136 - Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
- ASTM-F1147 - Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings
- ASTM-F1160 - Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
- ASTM-F1367 - Standard Specification for Chromium Sputtering Targets for Thin Film Applications
- ASTM-F1594 - Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications
- ASTM-F1941 - Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))
- ASTM-F1941M - Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]
- ASTM-F1978 - Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
- ASTM-F2329 - Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
- ASTM-F2674 - Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners [Metric]
- ASTM-F2833 - Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
- ASTM-F326 - Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
- ASTM-F44 - Standard Specification for Metallized Surfaces on Ceramic
- ASTM-F519 - Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
- ASTM-F871M - Specification for Electrodeposited Coatings on Threaded Components [Metric] (Withdrawn 2001)
- ASTM-G116 - Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
BSI:
- BS-1468 - Specification for tin anodes and tin salts for electroplating
- BS-1561 - Specification for silver anodes and silver salts for electroplating
- BS-1872 - Specification for electroplated coatings of tin
- BS-2656 - Specification for zinc anodes, zinc oxide and zinc salts for electroplating
- BS-2657 - Specification for fluoroboric acid and metal fluoroborates for electroplating
- BS-2868 - Specification for cadmium anodes and cadmium oxide for electroplating
- BS-3597 - Specification for electroplated coatings of 65/35 tin/nickel alloy
- BS-3745 - Method for the evaluation of results of accelerated corrosion tests on metallic coatings
- BS-4290 - Method for specifying electroplated coatings of silver and silver alloys for decorative and protective purposes
- BS-4479-2 - Design of articles that are to be coated. Recommendations for electroplated and autocatalytic coatings
- BS-4921 - Specification for sherardized coatings on iron or steel
- BS-5466-7 - Methods for corrosion testing of metallic coatings. Guidance on stationary outdoor exposure corrosion tests
- BS-622 - Specification for potassium and sodium cyanides for electroplating
- BS-7371-12 - Coatings on metal fasteners. Requirements for imperial fasteners
- BS-7371-3 - Coatings on metal fasteners. Specifications for electroplated zinc coatings
- BS-7371-7 - Coatings on metal fasteners. Specification for mechanically applied zinc and zinc based coatings
- BS-EN-10244-1 - Steel wire and wire products. Non-ferrous metallic coatings on steel wire. General principles
- BS-EN-10244-2 - Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Zinc or zinc alloy coatings
- BS-EN-10244-4 - Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Tin coatings
- BS-EN-10244-5 - Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Nickel coatings
- BS-EN-10244-6 - Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Copper, bronze or brass coatings
- BS-EN-10318 - Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings. Routine method
- BS-EN-12487 - Corrosion protection of metals. Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
- BS-EN-13144 - Metallic and other inorganic coatings. Method for quantitative measurement of adhesion by tensile test
- BS-EN-13603 - Copper and copper alloys. Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
- BS-EN-13811 - Sherardizing. Zinc diffusion coatings on ferrous products. Specification
- BS-EN-13858 - Corrosion protection of metals. Non-electrolytically applied zinc flake coatings on iron or steel components
- BS-EN-15646 - Electrodeposited coatings. Electroplated coatings of aluminium and aluminium alloys with supplementary treatment. Requirements and test methods
- BS-EN-ISO-10111 - Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods
- BS-EN-ISO-10289 - Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates. Rating of test specimens and manufactured articles subjected to corrosion tests
- BS-EN-ISO-10308 - Metallic coatings. Review of porosity tests
- BS-EN-ISO-10684 - Fasteners. Hot dip galvanized coatings
- BS-EN-ISO-1456 - Metallic and other inorganic coatings. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
- BS-EN-ISO-1461 - Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods
- BS-EN-ISO-1463 - Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
- BS-EN-ISO-14713-1 - Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures. General principles of design and corrosion resistance
- BS-EN-ISO-14713-2 - Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures. Hot dip galvanizing
- BS-EN-ISO-14713-3 - Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures. Sherardizing
- BS-EN-ISO-15720 - Metallic coatings. Porosity tests. Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
- BS-EN-ISO-15721 - Metallic coatings. Porosity tests. Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour
- BS-EN-ISO-16348 - Metallic and other inorganic coatings. Definitions and conventions concerning appearance
- BS-EN-ISO-18332 - Metallic and other inorganic coatings. Definitions and conventions concerning porosity
- BS-EN-ISO-2064 - Metallic and other inorganic coatings. Definitions and conventions concerning the measurement of thickness
- BS-EN-ISO-2081 - Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel
- BS-EN-ISO-2082 - Metallic coatings. Electroplated coatings of cadmium with supplementary treatments on iron or steel
- BS-EN-ISO-2177 - Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution
- BS-EN-ISO-21968 - Non-magnetic metallic coatings on metallic and non-metallic basis materials. Measurement of coating thickness. Phase-sensitive eddy-current method
- BS-EN-ISO-26945 - Metallic and other inorganic coatings. Electrodeposited coatings of tin-cobalt alloy
- BS-EN-ISO-3497 - Metallic coatings. Measurement of coating thickness. X-ray spectrometric methods
- BS-EN-ISO-3543 - Metallic and non-metallic coatings. Measurement of thickness. Beta backscatter method
- BS-EN-ISO-4042 - Fasteners. Electroplated coatings
- BS-EN-ISO-4516 - Metallic and other inorganic coatings. Vickers and Knoop microhardness tests
- BS-EN-ISO-4521 - Metallic and other inorganic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes. Specification and test methods
- BS-EN-ISO-4526 - Metallic coatings. Electroplated coatings of nickel for engineering purposes
- BS-EN-ISO-4527 - Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods
- BS-EN-ISO-6158 - Metallic and other inorganic coatings. Electrodeposited coatings of chromium for engineering purposes
- BS-ISO-10587 - Metallic and other inorganic coatings. Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods. Inclined wedge method
- BS-ISO-12686 - Metallic and other inorganic coatings. Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish
- BS-ISO-15726 - Metallic coatings and other inorganic coatings. Electrodeposited zinc alloys with nickel, cobalt or iron
- BS-ISO-22778 - Metallic coatings. Physical vapour-deposited coatings of cadmium on iron and steel. Specification and test methods
- BS-ISO-22779 - Metallic coatings. Physical vapour-deposited coatings of aluminium. Specification and test methods
- BS-ISO-4524-2 - Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Mixed flowing gas (MFG) environmental tests
- BS-ISO-4525 - Metallic coatings. Electroplated coatings of nickel plus chromium on plastics materials
- BS-ISO-9587 - Metallic and other inorganic coatings. Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
ISO:
- ISO-10111 - Metallic and other inorganic coatings -- Measurement of mass per unit area -- Review of gravimetric and chemical analysis methods
- ISO-10309 - Metallic coatings - Porosity tests - Ferroxyl test
- ISO-10683 - Fasteners -- Non-electrolytically applied zinc flake coatings
- ISO-10684 - Fasteners - Hot dip galvanized coatings
- ISO-10684 - Fasteners - Hot dip galvanized coatings
- ISO-12683 - Mechanically deposited coatings of zinc - Specification and test methods
- ISO-12686 - Metallic and other inorganic coatings -- Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish
- ISO-12687 - Metallic coatings - Porosity tests - Humid sulfur (flowers of sulfur) test
- ISO-1456 - Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
- ISO-1461 - Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods
- ISO-14647 - Metallic coatings - Determination of porosity in gold coatings on metal substrates - Nitric acid vapour test
- ISO-14713-2 - Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing
- ISO-15720 - Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
- ISO-15726 - Metallic and other inorganic coatings - Electrodeposited zinc alloys with nickel, cobalt or iron
- ISO-17334 - Metallic and other inorganic coatings - Autocatalytic nickel over autocatalytic copper for electromagnetic shielding
- ISO-17925 - Zinc and/or aluminium based coatings on steel - Determination of coating mass per unit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
- ISO-18332 - Metallic and other inorganic coatings - Definitions and conventions concerning porosity
- ISO-2063 - Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys
- ISO-2064 - Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness
- ISO-2080 - Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary
- ISO-2081 - Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel
- ISO-2177 - Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution
- ISO-2178 - Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
- ISO-2179 - Electroplated coatings of tin-nickel alloy - Specification and test methods
- ISO-21968 - Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
- ISO-22778 - Metallic coatings - Physical vapour-deposited coatings of cadmium on iron and steel - Specification and test methods
- ISO-2361 - Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method
- ISO-27830 - Metallic and other inorganic coatings - Guidelines for specifying metallic and inorganic coatings
- ISO-27831-1 - Metallic and other inorganic coatings - Cleaning and preparation of metal surfaces - Part 1: Ferrous metals and alloys
- ISO-27831-2 - Metallic and other inorganic coatings - Cleaning and preparation of metal surfaces - Part 2: Non-ferrous metals and alloys
- ISO-27874 - Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Specification and test methods
- ISO-2819 - Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion
- ISO-3497 - Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods
- ISO-3543 - Metallic and non-metallic coatings -- Measurement of thickness -- Beta backscatter method
- ISO-3543 - Metallic and non-metallic coatings -- Measurement of thickness -- Beta backscatter method
- ISO-3868 - Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method
- ISO-3882 - Metallic and other inorganic coatings - Review of methods of measurement of thickness
- ISO-4518 - Metallic coatings - Measurement of coating thickness - Profilometric method
- ISO-4519 - Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes
- ISO-4521 - Metallic and other inorganic coatings - Electrodeposited silver and silver alloy coatings for engineering purposes - Specification and test methods
- ISO-4524-2 - Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 2: Mixed flowing gas (MFG) environmental tests
- ISO-4525 - Metallic coatings - Electroplated coatings of nickel plus chromium on plastics materials
- ISO-4526 - Metallic coatings - Electroplated coatings of nickel for engineering purposes
- ISO-4527 - Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods
- ISO-4536 - Metallic and non-organic coatings on metallic substrates - Saline droplets corrosion test (SD test)
- ISO-4538 - Metallic coatings - Thioacetamide corrosion test (TAA test)
- ISO-4539 - Electrodeposited chromium coatings - Electrolytic corrosion testing (EC test)
- ISO-4541 - Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test)
- ISO-4543 - Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditions
- ISO-6158 - Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes
- ISO-7587 - Electroplated coatings of tin-lead alloys - Specification and test methods
- ISO-7989-2 - Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc-alloy coating
- ISO-9588 - Metallic and other inorganic coatings - Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement