About the ICS Code:
The ICS (International Classification for Standards) is a scheme much like the Dewey Decimal System.
Use it to find standards that are grouped by subject matter.
Back to ICS Index.
29.020: Electrical engineering in general
Level 1: 29 (ELECTRICAL ENGINEERING)
The following documents are a part of this series:
ASTM:
BSI:
- BIP-2118 - Protection against lightning. A UK guide to the practical application of BS EN 62305
- BIP-2223 - On-Site Guide (BS 7671:2008 Wiring Regulations)
- BS-4444 - Guide to electrical earth monitoring and protective conductor proving
- BS-4727-2-GROUP-16 - Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Instrument transformers
- BS-5754 - Specification for electrical analogue and state signals for use in coal mines
- BS-5760-10.2 - Reliability of systems, equipment and components. Guide to reliability testing. Design of test cycles
- BS-5760-10.3 - Reliability of systems, equipment and components. Guide to reliability testing. Compliance test procedures for steady-state availability
- BS-5760-10.5 - Reliability of systems, equipment and components. Guide to reliability testing. Compliance test plans for success ratio
- BS-5760-18 - Reliability of systems, equipment and components. Guide to the demonstration of dependability requirements. The dependability case
- BS-6396 - Electrical systems in office furniture and educational furniture. Specification
- BS-7454 - Method for calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
- BS-7506-2 - Methods for measurement in electrostatics. Test methods
- BS-EN-50160 - Voltage characteristics of electricity supplied by public electricity networks
- BS-EN-50191 - Erection and operation of electrical test equipment
- BS-EN-50419 - Marking of electrical and electronic equipment in accordance with article 11(2) of Directive 2002/96/EC (WEEE)
- BS-EN-60027-1 - Letter symbols to be used in electrical technology. General
- BS-EN-60027-3 - Letter symbols to be used in electrical technology. Logarithmic and related quantities, and their units
- BS-EN-60038 - CENELEC standard voltages
- BS-EN-60068-2-80 - Environmental testing. Tests
- BS-EN-60196 - IEC standard frequencies
- BS-EN-60204-1 - Safety of machinery. Electrical equipment of machines. General requirements
- BS-EN-60204-33 - Safety of machinery. Electrical equipment of machines. Requirements for semiconductor fabrication equipment
- BS-EN-60300-3-15 - Dependability management. Application guide. Engineering of system dependability
- BS-EN-60300-3-2 - Dependability management. Application guide. Collection of dependability data from the field
- BS-EN-60332-1-1 - Tests on electrical and optical cables under fire conditions. Test for a vertical flame propagation for a single insulated wire or cable. Apparatus
- BS-EN-60332-2-1 - Tests on electric and optical fibre cables under fire conditions. Test for vertical flame propagation for a single small insulated wire or cable. Apparatus
- BS-EN-60332-3-10 - Tests on electric and optical fibre cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Apparatus
- BS-EN-60332-3-21 - Tests on electric and optical fibre cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Category A F/R
- BS-EN-60332-3-22 - Tests on electric and optical fibre cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Category A
- BS-EN-60332-3-23 - Tests on electric and optical fibre cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Category B
- BS-EN-60332-3-24 - Tests on electric and optical fibre cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Category C
- BS-EN-60332-3-25 - Tests on electric and optical fibre cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Category D
- BS-EN-60695-1-10 - Fire hazard testing. Guidance for assessing the fire hazard of electrotechnical products. General guidelines
- BS-EN-60695-10-2 - Fire hazard testing. Abnormal heat. Ball pressure test
- BS-EN-60695-4 - Fire hazard testing. Terminology concerning fire tests for electrotechnical products
- BS-EN-60695-6-1 - Fire hazard testing. Smoke obscuration
- BS-EN-60695-6-1 - Fire hazard testing. Smoke obscuration
- BS-EN-60695-6-2 - Fire hazard testing. Smoke obscuration. Summary and relevance of test methods
- BS-EN-60695-7-1 - Fire hazard testing. Toxicity of fire effluent. General guidance
- BS-EN-60695-7-3 - Fire hazard testing. Toxicity of fire effluent. Use and interpretation of test results
- BS-EN-60695-8-1 - Fire hazard testing. Heat release. General guidance
- BS-EN-60695-9-1 - Fire hazard testing. Surface spread of flame
- BS-EN-60706-5 - Maintainability of equipment. Testability and diagnostic testing
- BS-EN-60909-3 - Short-circuit currents in three-phase a.c systems. Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth
- BS-EN-60950-22 - Information technology equipment. Safety. Equipment installed outdoors
- BS-EN-60950-23 - Information technology equipment. Safety. Large data storage equipment
- BS-EN-61025 - Fault tree analysis (FTA)
- BS-EN-61034-1 - Measurement of smoke density of cables burning under defined conditions. Test apparatus
- BS-EN-61082-1 - Preparation of documents used in electrotechnology. Rules
- BS-EN-61124 - Reliability testing. Compliance tests for constant failure rate and constant failure intensity
- BS-EN-61140 - Protection against electric shock. Common aspects for installation and equipment
- BS-EN-61165 - Application of Markov techniques
- BS-EN-61175 - Industrial systems, installation and equipment and industrial products. Designation of signals
- BS-EN-61310-1 - Safety of machinery. Indication, marking and actuation. Requirements for visual, acoustic and tactile signals
- BS-EN-61340-2-1 - Electrostatics. Measurement methods. Ability of materials and products to dissipate static electric charge
- BS-EN-61340-2-3 - Electrostatics. Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation
- BS-EN-61340-3-1 - Electrostatics. Methods for simulation of electrostatic effects. Human body model (HBM) electrostatic discharge test waveforms
- BS-EN-61340-3-2 - Electrostatics. Methods for simulation of electrostatic effects. Machine model (MM) electrostatic discharge test waveforms
- BS-EN-61340-4-3 - Electrostatics. Standard test methods for specific applications. Footwear
- BS-EN-61340-5-1 - Electrostatics. Protection of electronic devices from electrostatic phenomena. General requirements
- BS-EN-61508-1 - Functional safety of electrical/electronic/ programmable electronic safety-related systems. General requirements
- BS-EN-61508-2 - Functional safety of electrical/electronic/ programmable electronic safety-related systems. Requirements for electrical/electronic/ programmable electronic safety-related systems
- BS-EN-61508-3 - Functional safety of electrical/electronic/ programmable electronic safety-related systems. Software requirements
- BS-EN-61508-5 - Functional safety of electrical/electronic/ programmable electronic safety related systems. Examples of methods for the determination of safety integrity levels
- BS-EN-61508-7 - Functional safety of electrical/electronic/ programmable electronic safety related systems. Overview of techniques and measures
- BS-EN-62023 - Structuring of technical information and documentation
- BS-EN-62027 - Preparation of object lists, including parts lists
- BS-EN-62061 - Safety of machinery. Functional safety of safety-related electrical, electronic and programmable electronic control systems
- BS-EN-62305-1 - Protection against lightning. General principles
- BS-EN-62305-2 - Protection against lightning. Risk management
- BS-EN-62305-3 - Protection against lightning. Physical damage to structures and life hazard
- BS-EN-62305-4 - Protection against lightning. Electrical and electronic systems within structures
- BS-EN-62402 - Obsolescence management. Application guide
- BS-EN-62428 - Electric power engineering. Modal components in three- phase a.c. systems. Quantities and transformations
- BS-EN-62429 - Reliability growth. Stress testing for early failures in unique complex systems
- BS-EN-62430 - Environmentally conscious design for electrical and electronic products
- BS-EN-62493 - Assessment of lighting equipment related to human exposure to electromagnetic fields
- BS-EN-62561-3 - Lightning Protection System Components (LPSC). Requirements for isolating spark gaps
- BS-EN-62561-5 - Lightning protection system components (LPSC). Requirements for earth electrode inspection housings and earth electrode seals
- BS-EN-62561-6 - Lightning protection system components (LPSC). Requirements for lightning strike counters (LSC)
- BS-EN-62561-7 - Lightning Protection System Components (LPSC). Requirements for earthing enhancing compounds
- BS-EN-81346-1 - Industrial systems, installations and equipment and industrial product. Structuring principles and reference designations. Basic rules
- BS-EN-ISO-13849-1 - Safety of machinery. Safety-related parts of control systems. General principles for design
- BS-EN-ISO-13849-2 - Safety of machinery. Safety-related parts of control systems. Validation
- BS-IEC-60050-113 - International electrotechnical vocabulary. Physics for electrotechnology
- BS-IEC-60300-3-10 - Dependability management. Application guide. Maintainability
- BS-IEC-60605-6 - Equipment reliability testing. Tests for the validity and estimation of the constant failure rate and constant failure intensity
- BS-IEC-61650 - Reliability data analysis techniques. Procedures for comparison of two constant failure rates and two constant failure (event) intensities
- BS-IEC-61710 - Power law model. Goodness-of-fit tests and estimation methods
- BS-IEC-61882 - Hazard and operability studies (HAZOP studies). Application guide
- DD-CLC-50217 - Guide for in situ measurements. In situ measurement of disturbance emission
- DD-CLC-50349 - Qualification of electrical installation contractors
- DD-IEC-60479-1 - Effects of current on human beings and livestock. General aspects
- DD-IEC-60695-1-20 - Fire hazard testing. Guidance for assessing the fire hazard of electrotechnical products. Ignitability. General guidance
- DD-IEC-60695-11-3 - Fire hazard testing. Test flames. 500 W flames. Apparatus and confirmational test methods
- DD-IEC-60695-11-40 - Fire hazard testing. Test flames. Confirmatory tests. Guidance
- DD-IEC-60695-7-51 - Fire hazard testing. Toxicity of fire effluent. Estimation of toxic potency. Calculation and interpretation of test results
- DD-IEC-60695-8-3 - Fire hazard testing. Heat release. Heat release of insulating liquids used in electrotechnical products
- DD-IEC-60695-9-2 - Fire hazard testing. Surface spread of flame. Summary and relevance of test methods
- DD-IEC/PAS-61906 - Procedure for the declaration of materials in products of the electrotec hnical and electronics industry
- DD-IEC/PAS-62545 - Environmental information on electrical and electronic equipment (EIEEE)
- DD-IEC/PAS-62569-1 - Generic specification of information on products. Principles and methods
- DD-IEC/PAS-62596 - Electrotechnical products. Determination of restricted substances. Sampling procedure. Guidelines
- KIT-66 - Functional safety set (BS IEC 61508)
- PD-CLC-50422 - Guide for the application of the European Standard EN 50160
- PD-CLC-50442 - Guidelines for product committees on the preparation of standards related to human exposure from electromagnetic fields
- PD-CLC-50489 - Smart tracker chips. Feasibility study on the inclusion of RFID in electrical and electronic equipment for WEEE management
- PD-CLC-62102 - Electrical safety. Classification of interfaces for equipment to be connected to information and communications technology networks
- PD-IEC-60909-1 - Short-circuit currents in three-phase a.c. systems. Factors for the calculation of short-circuit currents according to IEC 60909-0
- PD-IEC-60943 - Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals
- PD-IEC-61508-0 - Functional safety of electrical/electronic/programmable electronic safety-related systems. Functional safety and IEC 61508
- PD-IEC-61734 - Application of symbols for binary logic and analogue elements
- PD-IEC-62051 - Electricity metering. Glossary of terms
- PD-IEC-62510 - Standardising the characteristics of electricity
- PD-IEC-62513 - Safety of machinery. Guidelines for the use of communication systems in safety-related applications
- TH-42073 - Ce Marking For Machinery, A Guide To The European Directive
IEC:
- IEC-1293 - Marking of electrical equipment with ratings related to electrical supply - Safety requirements
- IEC-152 - Identification by hour numbers of the phase conductors of 3-phase electric systems
- IEC-1543 - Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
- IEC-60038 - IEC standard voltages
- IEC-60050-111-1 - Amendment 1 - International Electrotechnical Vocabulary - Part 111: Physics and chemistry
- IEC-60050-121 - International Electrotechnical Vocabulary - Part 121: Electromagnetism
- IEC-60050-121-2 - Amendment 2 - International Electrotechnical Vocabulary - Part 121: Electromagnetism
- IEC-60050-131 - International Electrotechnical Vocabulary - Part 131: Circuit theory
- IEC-60050-131-1 - Amendment 1 - International Electrotechnical Vocabulary - Part 131: Circuit theory
- IEC-60050-151 - International Electrotechnical Vocabulary - Part 151: Electrical and magnetic devices
- IEC-60059 - IEC standard current ratings
- IEC-60068-3-4 - Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
- IEC-60068-3-6 - Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers
- IEC-60068-3-7 - Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load)
- IEC-60073 - Basic and safety principles for man-machine interface, marking and identification - Coding principles for indication devices and actuators
- IEC-60196 - IEC standard frequencies
- IEC-60204-1 - Safety of machinery - Electrical equipment of machines - Part 1: General requirements
- IEC-60204-11 - Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
- IEC-60204-32 - Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
- IEC-60204-33 - Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
- IEC-60216-5 - Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
- IEC-60216-5 - Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
- IEC-60331-1 - Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 ¦C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm
- IEC-60331-2 - Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830 ¦C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm
- IEC-60331-21 - Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV
- IEC-60331-23 - Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables
- IEC-60331-25 - Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures and requirements - Optical fibre cables
- IEC-60332-3-10 - Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
- IEC-60332-3-22 - Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
- IEC-60332-3-23 - Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
- IEC-60332-3-24 - Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C
- IEC-60332-3-25 - Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D
- IEC-60364-5-54 - Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
- IEC-60364-7-701 - Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower
- IEC-60364-7-702 - Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains
- IEC-60364-7-705 - Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises
- IEC-60364-7-706 - Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement
- IEC-60364-7-709 - Part 7-709: Requirements For Special Installations Or Locations - Marinas And Similar
- IEC-60364-7-711 - Electrical installations of buildings - Part 7-711: Requirements for special installations or locations - Exhibitions, shows and stands
- IEC-60364-7-717 - Low-voltage electrical installations - Part 7-717: Requirements for special installations or locations - Mobile or transportable units
- IEC-60445 - Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
- IEC-60447 - Basic and safety principles for man-machine interface, marking and identification - Actuating principles
- IEC-60479-1 - Effects of current on human beings and livestock - Part 1: General aspects
- IEC-60479-1 - Effects of current on human beings and livestock - Part 1: General aspects
- IEC-60479-2 - Effects of current on human beings and livestock - Part 2: Special aspects
- IEC-60479-5 - Effects of current on human beings and livestock - Part 5: Touch voltage threshold values for physiological effects
- IEC-60529 - Degrees of protection provided by enclosures (IP Code)
- IEC-60529 - Degrees of protection provided by enclosures (IP Code)
- IEC-60529 - Degrees of protection provided by enclosures (IP Code)
- IEC-60529 - Degrees of protection provided by enclosures (IP Code)
- IEC-60695-1-10 - Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
- IEC-60695-1-11 - Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment
- IEC-60695-1-20 - Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
- IEC-60695-1-21 - Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
- IEC-60695-1-30 - Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines
- IEC-60695-1-40 - Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids
- IEC-60695-10-2 - Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test
- IEC-60695-10-2 - Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test
- IEC-60695-10-3 - Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
- IEC-60695-11-10 - Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
- IEC-60695-11-11 - Fire hazard testing - Part 11-11: Test flames - Determination of the characteristic heat flux for ignition from a non-contacting flame source
- IEC-60695-2-10 - Fire Hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
- IEC-60695-2-11 - Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products
- IEC-60695-2-11 - Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products
- IEC-60695-2-12 - Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials
- IEC-60695-2-13 - Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
- IEC-60695-5-1 - Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance
- IEC-60695-5-2 - Fire hazard testing - Part 5-2: Corrosion damage effects of fire effluent - Summary and relevance of test methods
- IEC-60695-5-3 - Fire hazard testing - Part 5-3: Corrosion damage effects of fire effluent - Leakage-current and metal-loss test method
- IEC-60695-6-1 - Fire hazard testing - Part 6-1: Smoke obscuration - General guidance
- IEC-60695-7-1 - Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance
- IEC-60695-7-51 - Fire hazard testing - Part 7-51: Toxicity of fire effluent - Estimation of toxic potency: Calculation and interpretation of test results
- IEC-60695-8-1 - Fire hazard testing - Part 8-1: Heat release - General guidance
- IEC-60695-8-2 - Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
- IEC-60695-8-3 - Fire hazard testing - Part 8-3: Heat release - Heat release of insulating liquids used in electrotechnical products
- IEC-60695-9-1 - Fire hazard testing - Part 9-1: Surface spread of flame - General guidance
- IEC-60695-9-2 - Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods
- IEC-60943 - Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals
- IEC-60949-1 - Amendment 1 - Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
- IEC-60950-22 - Information technology equipment - Safety - Part 22: Equipment to be installed outdoors
- IEC-60950-23 - Information technology equipment - Safety - Part 23: Large data storage equipment
- IEC-61032 - Protection of persons and equipment by enclosures - Probes for verification
- IEC-61032 - Protection of persons and equipment by enclosures - Probes for verification
- IEC-61034-1 - Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
- IEC-61034-2 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
- IEC-61034-2 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
- IEC-61082-1 - Preparation of documents used in electrotechnology - Part 1: Rules
- IEC-61140 - Protection against electric shock - Common aspects for installation and equipment
- IEC-61175 - Industrial systems, installations and equipment and industrial products - Designation of signals
- IEC-61201 - Use of conventional touch voltage limits - Application guide
- IEC-61221 - Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications
- IEC-61286 - Information technology - Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange
- IEC-61340-2-1 - Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge
- IEC-61340-2-3 - Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation
- IEC-61340-3-1 - Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms
- IEC-61340-3-2 - Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms
- IEC-61340-4-3 - Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear
- IEC-61340-4-6 - Electrostatics - Part 4-6: Standard test methods for specific applications - Wrist straps
- IEC-61340-4-7 - Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization
- IEC-61340-4-8 - Electrostatics - Part 4-8: Standard test methods for specific applications - Discharge shielding - Bags
- IEC-61340-4-9 - Electrostatics - Part 4-9: Standard test methods for specific applications - Garments
- IEC-61340-5-1 - Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements
- IEC-61340-5-2 - Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide
- IEC-61340-5-2 - Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide
- IEC-61340-5-3 - Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices
- IEC-61508-1 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
- IEC-61508-4 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations
- IEC-61543-2 - Amendment 2 - Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
- IEC-61547 - Equipment for general lighting purposes - EMC immunity requirements
- IEC-61936-1 - Power installations exceeding 1 kV a.c. - Part 1: Common rules
- IEC-62061 - Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
- IEC-62061 - Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
- IEC-62061 - Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
- IEC-62061-1 - Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery
- IEC-62066 - Surge overvoltages and surge protection in low-voltage a.c. power systems - General basic information
- IEC-62079 - Preparation of instructions - Structuring, content and presentation
- IEC-62262 - Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
- IEC-62305-1 - Protection against lightning - Part 1: General principles
- IEC-62428 - Electric power engineering - Modal components in three-phase a.c. systems - Quantities and transformations
- IEC-62493 - Assessment of lighting equipment related to human exposure to electromagnetic fields
- IEC-62510 - Standardising the characteristics of electricity
- IEC-62513 - Safety of machinery - Guidelines for the use of communication systems in safety-related applications
- IEC-62561-4 - Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners
- IEC-62561-5 - Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals
- IEC-62561-6 - Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC)
- IEC-757 - Code for designation of colours
- IEC-81346-1 - Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules
- IEC-81346-2 - Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 2: Classification of objects and codes for classes
- IEC-870-2-1 - Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility
- IEC-870-2-2 - Telecontrol equipment and systems - Part 2: Operating conditions - Section 2: Environmental conditions (climatic, mechanical and other non electrical influences)
- IEC-949 - Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
- IEC-GUIDE-104 - The preparation of safety publications and the use of basic safety publications and group safety publications
- IEC-GUIDE-110 - HOME CONTROL SYSTEMS-GUIDELINES RELATING TO SAFETY
- IEC-GUIDE-111 - Electrical high-voltage equipment in high-voltage substations - Common recommendations for product standards
- IEC-GUIDE-116 - Guidelines for safety related risk assessment and risk reduction for low voltage equipment
- IEC-GUIDE-117 - Electrotechnical equipment - Temperatures of touchable hot surfaces
- IEC/PAS-61906 - Procedure for the declaration of materials in products of the electrotechnical and electronic industry
- IEC/PAS-62559 - IntelliGrid Methodology for Developing Requirements for Energy Systems
- IEC/PAS-62569-1 - Generic specification of information on products - Part 1: Principles and methods